I buy the devices I test unless the article says otherwise. Some links and discount codes on this site are paid links: if you buy through one, I earn a commission. It never changes a score or a verdict.
The Therabody TheraFace Mask Glo, which a lot of people shorten to TheraFace Glo or TheraGlo, is the brand’s cheaper LED mask: about $380 for 504 LEDs in red, infrared and blue, plus a scalp massage in the headstrap. Therabody also sells it with “the largest clinical study of any LED mask on the market“, so I wanted to see what’s really behind that.
Here’s my full TheraFace Mask Glo review, with my score, my before and after, and the LED masks I’d rather buy at this price.
59/100
Shelved since November 20268 weeks in the Glo didn’t change my skin. It’s the least bad of Therabody’s two LED masks, because its 168 light points are spread evenly over the whole face. But the LED bands under the eyes sit on the skin and lift the rest of the array up to 2 cm away, it weighs 1.1 lbs, and Therabody’s own study shows almost nothing on wrinkles. For this price there are better LED masks.
Buy it if
- It has to be a Therabody: the Glo lights the nose, the lips and the chin, and it’s $270 cheaper than the TheraFace Mask.
- You want to keep your eyes open during the session. The removable shields do that well.
Skip it if
- You’re buying it for wrinkles. Nothing moved on my face, and the brand’s study is weak on that point.
- A heavy LED mask bothers you. This one is a 1.1 lb rigid shell.
- You can add $70. The Nooance Aurion X252 is a better rigid LED mask.
What I tested: the Therabody TheraFace Mask Glo
I bought the white TheraFace Mask Glo on therabody online shop for $380 with my own money and without any arrangement with the brand (so I can say what I want about it …!). In the box you get the LED mask, its removable eye shields and a USB-C cable, and that’s it (the travel case is sold separately, at $80).
My test lasted 8 weeks at 4 sessions a week, in Red + Infrared mode only. I left the blue light out, as I did with the TheraFace Mask, because I test LED masks for anti-aging (and I don’t recommend relying on an LED mask alone for acne, but that’s a separate story…).
Results: 3/5
What changed on my face following my test, including my before-and-after photos. I also evaluate the “before-and-after” examples provided by the brand being tested, as well as the results of any studies that may have been conducted on the mask.
Read my results guideMy before and after with the TheraFace Mask Glo
My skin didn’t change in 8 weeks. Same texture, same pores, same fine lines around my eyes, and no “glow” effect on my skin. It’s exactly what happened with the TheraFace Mask, which carries the same LEDs, so here is my before and after.


Therabody’s study with instrumental measures
Therabody did indeed conduct a study, and honestly, it’s one of the most comprehensive I’ve read during my LED mask tests! That’s a good point, since it involved 104 people followed for 12 weeks, conducted at Eurofins CRL with measuring instruments and expert evaluation. However, the downside is the results, which were mainly significant in terms of glow:
- radiance improved by 25.4% and skin texture by 22.9% after 12 weeks (a good thing);
- fine lines didn’t improve significantly at 8 weeks, then by 4.0% at 12 weeks, in 19% only of the participants;
- wrinkle depth, measured by 3D imaging, didn’t improve significantly even at 12 weeks;
- under-eye lines shrank by 2.5% at 8 weeks and 3.1% at 12 weeks.
Yet the product page says the Glo is “clinically proven to reduce under-eye wrinkles and fine lines” in as little as 8 weeks. That sentence only holds thanks to the 2.5% under the eyes, and in my opinion this is misleading if you’re buying an LED mask for anti-aging!
Irradiance: 3/5
How much light reaches the skin, in mW/cm²? I evaluate this value, as well as how the information is presented, the conditions under which it was measured, and the total dose received in a single session. If the brand does not communicate it, I give it a severe rating.
Read my irradiance guideTherabody publishes 70.4 mW/cm² in red and 53 mW/cm² in infrared for the Glo. That looks strong next to the other LED masks I’ve tested, but the brand doesn’t say at what distance it was measured, and by my own math on its figures it’s the light at the surface of each LED. This was already the case with the Shark Cryoglow LED mask that I’ve tested, which is at 128 mW/cm² on the LED array…
- TheraFace Mask Glo, distance not disclosed 70.4
- Nooance Elite X600, at the skin 50
- Nooance Aurion X252 45
- CurrentBody Series 2 30
The distance is the whole problem here, because the Glo doesn’t sit on the face. When I slide a finger under the shell, I find about 2 cm of air at my chin, and every millimeter between an LED and the skin reduces the light you actually receive…

Therabody’s preset gives each color 4 minutes, which makes 16.89 J/cm² of red (published by the brand), while I look for about 30 J/cm² per session, the equivalent of 50 mW/cm² for 10 minutes. So yes, the number on the page is high, but honestly I trust a 50 mW/cm² calibrated at the skin, like on the Nooance Elite X600 (my review here), much more than a 70.4 with no distance attached.
Coverage: 3.5/5
How many points of light does the mask actually feature, how evenly are they distributed, and which areas remain uncovered? Note that I am counting “bulbs” and not LEDs, because the number of LEDs often includes two, three or more diodes per bulb, which inflates the apparent coverage area.
Read my coverage guideThis is the Glo’s best point, and the reason I prefer it to the more expensive TheraFace Mask (my review). The 504 LEDs are grouped by 3 (one red, one infrared and one blue chip), so your face gets 168 light points, and they’re laid out evenly from the forehead to the chin, with nothing missing on the nose or around the mouth.

168 is a decent count, fairly speaking. It’s more than the 126 of the Nooance Aurion X252 (my review) and the 110 of the CurrentBody Series 2 (my review), but still far from the 300 of the Nooance Elite X600.
The LED bands under the eyes of the TheraFace Mask Glo
What I still don’t like with the TheraFace Glo is how the shell is built around the eyes. Under each eye opening there’s a kind of raised cushion that carries its own LEDs, as you can see on the photo below. Those 2 bands touch my skin rather well, so the under-eye area is the one place where the light is close.

But since they’re thicker than everything else, they lift the whole LED array away from the forehead, the cheeks and the chin. That’s why I’m not a fan of rigid LED masks in general, and even less of the ones that raise the array like this one or the Shark CryoGlow.
Proof: 3/5
What the brand clearly displays and what I check in the FDA file: wavelengths (in nm), emitted dose, FDA clearance number, product study, safety tests, warranty.
Read my proof guideThe Glo’s page shows an “FDA Cleared” badge, but I couldn’t find any FDA file for this LED mask. Therabody has one clearance for an LED mask, K230293, and it describes a device with 648 LEDs, so the TheraFace Mask and not the Glo (a clearance doesn’t pass from one model to another).
What the brand publishes
- Published: Wavelengths in nm: 633, 830 and 415
- Published: Dose per session calculable: 16.89 J/cm² for 4 minutes of red, in Therabody’s FAQ
- Missing: FDA clearance verifiable in the database: no file under the Glo’s name
- Published: A clinical study on this exact model: 12 weeks, 104 participants
- Published: Study documented with a named laboratory: Eurofins CRL
- Missing: Photobiological safety declared: not stated in the Glo’s manual
- Published: Warranty documented: 1-year limited warranty
Proof: 3/5
The study itself is a good point for Therabody, since it was done on the Glo, in a named lab, with real measurements instead of a simple questionnaire. The problem lies in the results themselves, as I explained in the “Results” section.
Comfort: 2.5/5
Fit, weight, heat, eye comfort and minor inconveniences: straps, timer, battery. A mask that becomes a chore to wear several evenings a week scores poorly in these areas, as using it should be a pleasant experience!
Read my comfort guideTherabody’s page calls the Glo “lightweight at 514g“. That’s 1.1 lbs, and for me it’s a heavy LED mask! The bands under the eyes carry part of that weight, which is why they don’t hurt, but it’s not enough and you feel the shell on your face for the whole session.
I’m not the only one, as one of you told me about this LED mask that “it is so heavy and clunky and the massage feature is completely useless“.
I agree with that review on the massage too. It only vibrates on the scalp, through the headstrap, and it adds nothing to a red light therapy session. Overall, I don’t like it when brands add features that make no sense when you’re trying to do a light therapy session: focus on the light rather than gadgets!
The eye protection for the Theraface Glo LED mask
This part is well designed, which is a strong point because many brands fall short in this area. The removable eye shields block the light properly, so I kept my eyes open during my sessions without any discomfort.
Buttons and battery of the TheraFace Mask Glo
There’s no remote: you turn the Glo on with a button on the side of the shell, with the battery inside the mask (which explains part of the weight). The full preset lasts 12 minutes, 4 per color.

The battery gave me 5 sessions per charge and not one more, which matches the 60 minutes Therabody announces. With 4 sessions a week, that means charging it every week, which is the lower limit before it becomes downright disturbing.
Value: 2.5/5
The price I paid, when viewed in the context of the results achieved and compared to other masks I have tested, both within this price range and at different price points.
Read my value guideAt $380, the Glo is one of the cheaper LED masks from a big brand, and it’s much easier to justify than the $650 TheraFace Mask. But a low price doesn’t make a good deal when the LED mask is uncomfortable and gave me no result.
| LED mask | Price on the brand’s US site | Light points | Shell | My score |
|---|---|---|---|---|
| Therabody TheraFace Mask Glo | $379.99 | 168 | Rigid, 514 g | 59/100 |
| Nooance Aurion X252 | $449 | 126 | Rigid, 286 g | 84/100 |
| CurrentBody Series 2 | $469.99 | 110 | Molded silicone | 72/100 |
| Nooance Elite X600 | $749 | 300 | Molded silicone | 92/100 |
If you want a rigid LED mask around this price, I’d add $70 and take the Nooance Aurion X252, which weighs almost half as much.
And if you plan to use your LED mask for years, the Nooance Elite X600 is the one I’d save for. Both are far above the Glo in my LED mask ranking.


Safety & support: 3/5
Eye protection, build quality, warranty, returns, responsiveness of customer support, and the mask’s ability to remain functional over time.
Read my safety & support guideThe Glo comes with eye shields in the box, a 1-year limited warranty and 30 days to return it, which is correct but not generous.
What costs it here is the FDA clearance I couldn’t verify. Still, I didn’t need to contact Therabody’s support during my test because my LED mask had no technical issues during the test.
Who shouldn’t buy the TheraFace Mask Glo
Skip this one if you recognize yourself
- You want an LED mask for wrinkles. Therabody’s own study found 4.0% on fine lines after 12 weeks, and I saw nothing in 8.
- You want the LEDs against your skin. Only the bands under the eyes touch it. The chin is about 2 cm away.
- You get tired of weight on your face. 1.1 lbs in a rigid shell, for 12 minutes.
- You can spend a little more. The Nooance Aurion X252 is a better rigid LED mask for $70 extra.
Am I still using the TheraFace Mask Glo?
Updated November 2026. No, I don’t use it anymore. I’m back on my Nooance Elite X600. I don’t recommend the TheraFace Mask Glo.
For this price there are better LED masks: the Glo is uncomfortable, its efficacy on aging isn’t proven, and a design that keeps the LEDs away from the skin works against it.
If you’re hesitating between Therabody’s two models, I detail the differences in my comparison of the TheraFace Mask and the Glo.
Therabody TheraFace Mask Glo: your questions
Is the TheraFace Mask Glo FDA cleared?
Therabody says so on the product page, but I found no FDA file for the Glo. The brand’s only LED mask clearance, K230293, describes the 648-LED TheraFace Mask. And FDA cleared isn’t FDA approved, which is common for LED masks.
How long is a TheraFace Mask Glo session?
The preset lasts 12 minutes: 4 of red, 4 of Red + Infrared and 4 of blue. In Therabody’s study the participants did it 6 days a week, and I did 4 sessions a week in Red + Infrared only.
Is the TheraFace Mask Glo heavy?
Yes. It weighs 514 g, so 1.1 lbs, in a rigid shell, and I felt it during every session. The Nooance Aurion X252, another rigid LED mask, is 286 g.
TheraFace Mask Glo or TheraFace Mask: which one is better?
The Glo, in my opinion. It has 168 light points against 216, but they cover the whole face, while the TheraFace Mask has no LEDs down the middle. It’s also $270 cheaper. Still, I don’t recommend either of them.
Test log
- Exact model
- Therabody TheraFace Mask Glo, white, SKU TF0004349-1A20
- How I got it
- Bought on therabody shop for $379.99, no partnership with the brand
- Test
- 8 weeks, 4 sessions a week, Red + Infrared only, 32 sessions
- FDA
- openFDA 510(k) search on Therabody and TheraFace: K230293, TheraFace Mask, decided June 9, 2023. No entry for the Glo
- Study
- Therabody blog, “The Clinical Findings Behind TheraFace Mask Glo”: 115 enrolled, 104 completed, ages 35 to 65, 12 weeks, 12-minute preset 6 days a week, Eurofins CRL, expert grading, Clarity 3D, VISIA-CR, Cutometer MPA 580, participants compensated, no control group mentioned

